Grizzly G1066R Drum Sander

From Xerocraft MakerSpace
Jump to: navigation, search
The drum sander.

Specs

  • Main motor: 5 HP, 220V, single-phase, 3450 rpm, sealed & permanently lubricated bearings
  • Feed motor: 1/4 HP, single phase, 1A, 1720 rpm, sealed & permanently lubricated bearings
  • 11 FPM feed rate
  • 2300 FPM sandpaper speed
  • Two 6" sanding drums
  • Two 4" dust ports for easy hook-up to a collection system
  • Footprint: 34.5" x 24"
  • Weight: 389 lbs
  • Full-load current rating: 26A
  • Minimum circuit size: 30A

Usage

Only use the drum sander for sanding. Do not use the drum sander to remove significant amounts of material, as this willresult in damage to the drums. Be sure that nobody is standing on the exit side of the drum sander before sending your material through.

The drum sander can be used with material meeting the following constraints:

  • Board width: 2" min, 23.5" max
  • Board thickness: 1/8" min, 4.25" max
  • Board length: 9" min

Resources